LUKAS Cubic-Boron-Nitride Mounted Points
In addition to the LUKAS mounted points with Cubic-Boron-Nitride in vitrified bond we offer mounted points where Cubic-Boron-Nitride has been electro-plated. In this case we combine the advantages of Cubic-Boron-Nitride with those of the electro-plating process. The abrasive used is ultra-hard; in addition, the carrier can be developed and produced in various shapes. Cubic-Boron-Nitride as an abrasive is exclusively used for the grinding of hardened steels. When using these tools you will profit from significant increases in the performance and an improved surface finish in case of streamlined production processes. Thus Cubic-Boron-Nitride will develop potentials in cost reduction and quality improvement. It will also contribute to an efficient production. Electro-plated Cubic-Boron-Nitride can be used in dry grinding – coolants will increase tool life.
Cubic-Boron-Nitride Mounted Points (electro-plated)
• Ultrahard grinding tools to machine hardened steels
• Electro-plating process allows for a great variety in shapes
• for dry grinding – also possible with coolants
LUKAS Diamond Mounted Points (electro-plated)
For a cost effective machining of ceramic, glass, carbides, oxides, nitrides, CRP, GRP, PCBN, PCD, diamond, plastics and rubber we offer LUKAS diamond points in vitrified bond as well as electro-plated diamond points. Electro-plated diamond points can be manufactured in various shapes. As a result, the shape of these diamond points from LUKAS can be adapted to the application concerned. In practical application the advantage will be: In case of streamlined production processes you may take advantage of potentials in cost reduction and realize improvements in quality at the same time. By using our LUKAS electro-plated diamond points cycle times will be reduced, tool life will be increased significantly, the cost for the tools and set-up costs will be reduced, surface finishes will be improved and deviations in geometry will be avoided in a reliable manner.
Electro-plated diamond points
• Ultrahard grinding tools to machine ceramic, glass, carbides, oxides, nitrides, CRP, GRP, PCBN, PCD, diamond, plastics and rubber
• Electro-plating process allows for a great variety in shapes
• For dry grinding – also possible with coolants
LUKAS Diamond files (electro-plated)
For an optimized filing of ceramic, glass, carbides, oxides, nitrides, CRP, GRP, PCBN, PCD, diamond, plastics and rubber we offer various LUKAS diamond files: Diamond files for off-hand filing machines, diamond needle files as well as diamond rifflers. The LUKAS diamond files are coated with ultrahard abrasives and will demonstrate in practical application advantages in cost and quality. Owing to a wide choice of shapes (for instance flat, round, flat hand, triangular, square, knife, bird tongue) and grit sizes LUKAS diamond files can be adapted to the application concerned. In everyday practice LUKAS diamond files have proven their quality by a long tool life and excellent surface finishes.
Electro-plated diamond files
• Diamond files for off-hand filing machines, diamond needle files as well as diamond rifflers.
• Ultrahard diamond files to machine ceramic, glass, carbides, oxides, nitrides, CRP, GRP, PCBN, PCD, diamond, plastics and rubber
• A great variety in shapes
